成年人网站

15 km outdoor wireless monitoring network bridge

15 km outdoor wireless monitoring network bridge

Product Description: sf-5040g25 high power outdoor wireless bridge is suitable for wireless network connection service in harsh outdoor environment. It provides high bandwidth network connection and multimedia IP data transmission requirements of deployed enterprises and industrial users. It is not only suitable for network transmission, but also suitable for large-scale IP monitoring. Sf5040g25 high-power outdoor wireless bridge equipment can use built-in 25dbi gain antenna to effectively connect two long-distance nodes. The transmission distance can reach 15km, and the transmission bandwidth can reach 60-90mbps, which can provide wireless transmission quality no less than that of wired network.

Product overview Product parameters Equipment application Related cases


 1-1F5051416323C.jpg Wireless monitoring bridge scheme

Product Description:
Sf-5040g25 high power outdoor wireless bridge is suitable for wireless network connection service in harsh outdoor environment. It provides high bandwidth network connection and multimedia IP data transmission requirements of deployed enterprises and industrial users. It is not only suitable for network transmission, but also suitable for large-scale IP monitoring. Sf-5040g25 high power outdoor wireless bridge equipment can effectively connect two long-distance nodes by using built-in 25dbi gain antenna. The transmission distance can reach 15km and the transmission bandwidth can reach 60-90mbps, which can provide wireless transmission quality no less than that of wired network.
Sf-5040g25 high power outdoor wireless bridge equipment supports AP mode, WDS mode and clientbridge + repeater AP mode. The cooperation between different modes can achieve different effects, and can do point-to-point transmission and point-to-multipoint transmission. In WDS mode, the link form of 1 to 8 (fill in 8 different MAC addresses) can be realized. In AP mode, the theory can support 32 clients. The device supports Chinese and English interface, easy to operate, eliminates the tedious operation mode, makes debugging more convenient, conducive to rapid deployment, and is very suitable for the rapid start of engineering and technical personnel. DC 12 ~ 24 V wide voltage input design is adopted for power supply, and the actual power consumption of the equipment is less than 5 W. in the case of no power supply in the field, it can be flexibly combined with battery, solar energy, wind power and other power supply modes.


Product features:

Operation mode: Support AP mode, WDS mode and clientbridge + repeater AP mode

Support IEEE 802.11 an mode, transmission rate 2tx (300mbps) / 2RX (300mbps)

Support up to 29dbm wireless output power

Support wide voltage input, voltage input range DC12 ~ 24 v

As long as the lightning protection mechanism of 4KV is used in the interior of the house, the lightning protection mechanism can be used as long as the lightning protection mechanism is used for the lightning protection of the balcony.

Support 8 groups of multiple BSSID functions and IAPP wireless network roaming function

It supports wireless IGMP V1 / V2 / V3 functions, and can transmit real-time audio and video packets on the wire.

Support WDS (Wireless Distribution Service), support 8 groups of bridging functions, and support multiple groups of tag VLAN.

The intelligent wireless distance parameter can be set automatically. According to the input distance, the system can automatically fine tune the optimal corresponding advanced parameters to achieve the optimal wireless transmission rate effect of relative distance

It supports QoS WMM (quality service) bandwidth management and traffic control, and supports IEEE 802.1p QoS standard multicast and priority function. It is suitable for multimedia applications. Data priority can be set according to the IP DSCP (DiffServ code point) field

Support wired and wireless interface ieee802.1d spanning tree extension tree function. When multiple WDS wireless connections are used and wired lines are connected at the same time to achieve mutual backup between wired and wireless networks, it can effectively prevent the abnormal infinite loop problem of network loop

Support SNMP V2C, SNMP V3 and SNMP trap


Wireless Features:

Support ieee802.11an, up to 300mbps (TX), 300mbps (Rx) transmission rate

The transmission power control can be controlled and the power can be adjusted according to the environment

Support channel selection: manual setting or automatic setting

Whether there are wireless network scanning stations for rapid deployment around the base

Each group of SSIDs can support up to 32 connected users and up to 7 groups of SSIDs (virtual AP)

WDS (Wireless Distribution Service) can support 8-unit bridging function

Support DFS (dynamic frequency selection), IEEE 802.1d - Multi Country roaming and other specifications

Authentication / encryption (Wireless Security)

It has the function of blocking users from discovering another specific VLAN group and assigning VLAN according to SSID

It supports data transmission encryption EAP-TLS + dynamic WEP, eap-ttls + dynamic WEP PEAP / mspeap + dynamic WEP, and supports user authentication wpa-psk / TKIP, wpa-802.1x/tkip, 802.11iwpa2-psk / CCMP / AES , WPA2 (802.1x / CCMP / AES)

The support of hidden SSID can prevent unauthorized users from intending to access the wireless network

Access control list (ACL) can be implemented by MAC and IP address filtering


Related products


Product parameter table:

Network standard

IEEE 802.11a/n;IEEE802.3; IEEE802.3u

Chipset

Atheros AR7240+ AR9280

SDRAM

32 M Byte

Flash

8 M Byte

Ethernet interface

2 x 10/100  Foundation-trj45 joint

Radio frequency

OFDM

Data transmission rate

802.11a:54, 48, 36, 24, 18, 12, 9, 6Mbps

802.11n:20-MHz  Bandwidth: data rate supported by MCS 0 ~ 15 for

40-MHz Bandwidth: data rate supported by MCS 0 ~ 15for

working frequency

5.15~5.35 GHz

5.47~5.7 GHz

5.745~5.825 GHz

Transmit power

Up to 29  ± 2 dBm

Sensitivity

-92dBm@ 11Mbps, -73dBm @ 54Mbps, -73/-69dBm @   HT20/HT40 MCS15

Security

64-bit/128-bit/152-bitWEP encryption

WPA/ WPA2(-PSK using TKIP or AES) WPA/ WPA2   (-EAP using TKIP)

802.1x Authentication; hidden SSID

Antenna port

2 x MCX  Joint

Antenna gain

Built in 25dbi dual polarization flat antenna

Operation mode

Information selection mode - AP / client bridge / WDS bridge PTP and PTMP (up to 8 links)

Setting variables by country

Step power 1dbm step

work environment

Working temperature - 45 ~ + 70 ℃, working humidity 10 ~ 90%

size

370mm*370mm*100mm

weight

3.2Kg

Power supply mode

POE Power supply: 12 ~ 24 V ± 5%


Related products


Sf-5040g25 high power outdoor wireless bridge is suitable for wireless network connection service in harsh outdoor environment, providing high bandwidth network connection and multimedia IP data transmission requirements of deployed enterprises and industrial users. It is not only suitable for network transmission, but also suitable for large-scale IP monitoring. Sf-5040g25 high power outdoor wireless bridge equipment can effectively connect two long-distance nodes by using built-in 25dbi gain antenna. The transmission distance can reach 15km and the transmission bandwidth can reach 60-90mbps, which can provide wireless transmission quality no less than that of wired network.

Sf-5040g25 high power outdoor wireless bridge equipment supports AP mode, WDS mode and clientbridge + repeater AP mode. The cooperation between different modes can achieve different effects, and can do point-to-point transmission and point to multipoint transmission. In WDS mode, the link form of 1 to 8 (fill in 8 different MAC addresses) can be realized. In AP mode, the theory can support 32 clients. The device supports Chinese and English interface, easy to operate, eliminates the tedious operation mode, makes debugging more convenient, conducive to rapid deployment, and is very suitable for the rapid start of engineering and technical personnel. DC 12 ~ 24 V wide voltage input design is adopted for power supply, and the actual power consumption of the equipment is less than 5 W. in the case of no power supply in the field, it can be flexibly combined with battery, solar energy, wind power and other power supply modes. Due to these characteristics, the product is widely used in construction site monitoring, forest fire prevention monitoring, scenic spot monitoring, oil and mine monitoring, highway monitoring, factory campus monitoring and so on.
 

Related products


If you have any questions about this product, please ask!

Your name:
contact information:
Contact email:
Region:
Remarks:
    
contact us
Contact
 contact us
We'd love to hear your voice

Service hotline: 0755-28248861

Customer service QQ: two billion seven hundred and twenty-three million five hundred and ninety-one thousand seven hundred and sixty-four

Customer service QQ: two billion nine hundred and fifty-three million six hundred and thirteen thousand seven hundred and seventy-two

Customer service QQ: three billion one hundred and ten million eight hundred and thirty-nine thousand five hundred and eighty-six

Customer service QQ: two billion one hundred and sixteen million eight hundred and ninety thousand four hundred and sixty

Email: admin@egibl.com

Emergency contact: thirteen billion five hundred and twenty-eight million four hundred and seven thousand eight hundred and sixty-two

Address: 3 / F, building a, Henggang sub Park, smart Valley Innovation Park, 1171 Shenhui Road, Longgang District, Shenzhen

Solution
[up]